Analysis Of Key Materials For Manual Switch Valves
Oct 23, 2025
Leave a message
In the design and application of manual switch valves, material selection is a core factor determining their corrosion resistance, strength, sealing performance, and service life. Facing complex operating conditions such as high temperature, high pressure, and strong corrosion, the appropriate selection of different materials directly affects the reliability of the valve and the safety of the system.
Carbon steel is the most basic general-purpose material, represented by Q235 and WCB. It combines good strength and machinability, is inexpensive, and is widely used in low-pressure, normal-temperature applications for non-corrosive media such as water, steam, and oil. However, its corrosion resistance is limited, requiring surface coatings or internal linings for protection, and it is not suitable for acidic or alkaline environments.
Stainless steel, due to the passivation film imparted by its chromium-nickel alloy, has become the preferred choice in corrosion-resistant applications. 304 (06Cr19Ni10) is resistant to general acids and alkalis, suitable for pipelines in food, pharmaceutical, and light chemical industries; 316 (06Cr17Ni12Mo2), with the addition of molybdenum, significantly improves its resistance to chloride ion corrosion, making it an ideal choice for seawater, brine, and sulfur-containing media; 317L and duplex steel (2205/2507) further enhance resistance to pitting and stress corrosion, capable of handling high-concentration acid solutions and high-temperature chloride environments.
Cast iron is mainly composed of gray cast iron (HT200) and ductile iron (QT450). The former has low cost and good castability, and is mostly used in low-pressure, normal-temperature systems such as water supply and drainage, and HVAC; the latter, through spheroidizing treatment, improves toughness and strength, can withstand higher pressures, and is gradually replacing gray cast iron in industrial pipelines.
Copper and copper alloys (brass H62, bronze ZCuSn10Pb1) have excellent thermal conductivity, are non-magnetic, and easy to process. They are commonly used in instrument gas circuits, refrigeration systems, and other applications requiring cleanliness and anti-magnetic properties. However, their corrosion resistance is weaker than stainless steel, and they must be avoided in strong oxidizing media.
Special alloys are designed for extreme operating conditions: Hastelloy (C276, B2) is resistant to strong corrosion (such as hydrochloric acid and sulfuric acid) and is used in chemical reactors; titanium alloys have low density and excellent corrosion resistance, making them suitable for aerospace and seawater desalination; Monel alloys resist hydrofluoric acid corrosion and are the first choice for fluoride salt media. In addition, engineering plastics (PVC, PP, PVDF), with their lightweight and corrosion-resistant properties, are widely used in highly corrosive low-pressure pipelines.
Material selection requires a comprehensive consideration of media characteristics, temperature, pressure, and cost. Only materials matched to the operating conditions can maximize the performance of manually operated valves and build a durable defense for industrial fluid control.
Send Inquiry
















